亚丹坚持采用编号为SPCC的优质冷轧钢板,厚度在0.5mm-1.0mm之间,以保证最终产品的质量和耐用性。 亚丹非常重视技术开发,投入大量资金用于技术研发和生产设备的更新换代。 每个生产程序经历了30年的测试,形成一套严谨的科学化生产工艺及精准的流水线作业流程。

钢板处理
钢板采用先进的机械切割,模具成型精度高,效率高。

-剪板
15台常规切割机

-激光切割
5台复杂激光切割机

-36台自动冲孔机
36台自动冲孔机
4台数控冲孔机

-折弯
24台折弯机

-成型
8台全自动成型机

-点焊
18台二氧化碳气体电弧焊机
10台高精度点焊机
5个机器人焊接臂

-Polishing
15 polishing machines

Spraying & Coating
All the furniture parts will firstly go through
-9-position tunnel’s pre-processing
1.pre-skim
2.Skim
3.Washing
4.Washing
5.Surface adjustment
6.Phosphate process
7.Washing
8.Washing
9.Hot washing

And then those furniture parts are ready to go into
-Spraying &Coating Process
During the process, those parts with go through following rooms:
1.Dryer room
2.Spraying room
3.Solidification room
After one-by-one quality check, the good ones are delivered to installation and packing area while unqualifies ones will take remedies or scrapped directly.

Packing
After quality check, all qualified components and parts will be packed with EPE foam inside and carton box outside which is printed of detailed information, also corner protection, protective edging and inside bubble plastic lining are optional as client’s requirements. Then the packing team will seal the carton box through packing machine to ensure the products are packed tightly.

Loading
The packed products will be transferred on conveyor belt or go down by the elevator to the container. Under the supervision of inspector, the products will be removed gently and arranged closely in the container to avoid marks caused during the transportation in all likelihood.

产品目录